Give each unit type its sheet
A sheet says which items a unit type has and how much of each: a two-bedroom has 4.2 m of benchtop and 38 m² of carpet. Every unit of that type shares the sheet. Until a type has a sheet, its units have no finishes list.
Before you start
Section titled “Before you start”- You need the “Set up the finishes catalogue” permission.
- The unit types exist. They are set up in Buildings & Units, not here.
- The project has its items. See Set up the items and options.
- Open Finishes Schedule, choose Set up, then Unit type sheets. A type with no sheet is marked No sheet yet; the others show how many of the project’s items they have.
- Choose Set up sheet beside the type.
- If another type already has a sheet, Start from lets you copy it into the form as a starting point.
- Under Items, tick each item this type has. Tick all and Untick all do the lot.
- Beside each ticked item, type the quantity, in the measure the item uses. Use 1 where the item is simply there or not.
- Read the line at the bottom: “12 items apply to the 24 Two bedroom units.”
- Choose Save sheet.
To change a sheet later, choose Edit sheet.
Different prices for one type
Section titled “Different prices for one type”A palette or an upgrade can cost more or less for one unit type: a stone kitchen costs more in a three-bedroom than in a studio. This part of the sheet appears once the project has a palette or an upgrade.
- In the sheet, switch on Different prices for this type.
- Type a price beside each palette or upgrade that differs. Leave a price empty to use the usual one, which is shown in grey.
- Choose Save sheet.
The Own prices column on the list shows how many prices a type has of its own.
Good to know
Section titled “Good to know”- Only the items on the sheet appear on a unit’s list. A studio with no study has no study carpet to choose.
- Quantities drive cost, not price. A unit’s extra cost is the quantity on the sheet times the difference between the chosen option’s cost rate and the Standard option’s cost rate.
- Every ticked item needs a quantity before the sheet can be saved.
- Changing a sheet changes every unit of that type that is not locked.
- A sheet is not copied when items and options are copied from another project.

